Featuring a plug and play concept, the RevoPower Trailblazer II is the perfect companion for off-grid power at home, camping, tailgating, parties, events, construction job sites, road trips, overlanding, etc.
What makes Trailblazer II so special?
The Trailblazer II's inverter and charge controller are mounted inside which means there’s no exposed wiring and the sensitive components are protected from most dust and some water. The heavy duty enclosure makes it great for throwing in the back of a truck, pulling down small hiking trails and any other portable or permanent applications.
Being able to supply your own battery makes this solar generator one of the best and least expensive options on the market. RevoPower solar generators are completely modular with connections to add more batteries in the future.
Future maintenance is easy with simple hand tools and off-the-shelf parts, unlike some solar generators that are worthless if one component fails. We design and build in USA, and we understand that being able to repair your solar generator is a right that you deserve. Featuring our high performance solar charge controllers, these solar generators can be used with virtually any 12V battery on earth. Installing your own batteries is super easy: Just connect the supplied 5/16” (M8) ring terminal wires to your battery’s posts.
Wind Controls:
|
Solar charge controller: |
930W max (Upgradeable) / 50-55V DC Max VOC 3 x Independent charge controllers: 450W (55V max) + 240W (50v max) + 240W (50V max) |
|
Inverter rated power output: |
Inverter watts refers to the maximum continuous output. Max surge output is 2 x the continuous rating. |
|
Input ports: |
(3) Solar panel connector pair (1) Wind turbine input (3 phase "wild ac") (1) 12V Pair 3/8" input/output post terminals for connecting external batteries, wall charger, or other devices |
|
Output ports: |
6 x 15A Household 110/120VAC / 1PH / 60 HZ 3-prong outlet (If equipped with inverter) (5) USB-C, see "Output technology" below (5) USB-A, see "Output technology" below 12V socket, 30A (360W max output) 12V Pair 3/8" input/output post terminals for connecting external batteries or devices |
| Output technology: |
(2) USB-C PD & (1) USB-A QC 3.0:
(3) USB-C 5V/2A (4) USB-A 5V/2A |
|
Temperature range: |
-4°F~131°F (-20°C~55°C) |
|
Battery chemistry compatibility: |
Deep Cycle Lead Acid (A 12V automotive starting battery will function, but run times will not be ideal) |
|
Outside dimensions: |
37-1/2” L x 23” W x 23-1/2” H |
|
Inside (Not including inverter): |
33-1/2" L x 18-1/4" W x 19-1/4" H |
|
Warranty: |
5 years |
