Hybrid 4,000W (2,000W On Grid + 2,000W Off Grid) Portable MPPT Solar Generator Powerhouse and Pure Sine Battery Box, USB, 12V
Don’t waste your solar panels with an off-grid system!
RevoPower's simple solution for today's solar power generation.
How does it work?
- Connect your batteries and solar panels (not included). Then plug the grid-tie outputs into your 110/120V wall outlet. Your work is done here. Everything else is autonomous!
- The hybrid solar generator’s first priority is charging your batteries. It will only charge until the batteries reach maximum voltage (Typ 13.0V, adjustable).
- Once the batteries are full, all extra power will be sent back to the grid.
- The battery charge voltage will be maintained and ready to go.
- If/When you lose the grid connection, the on-grid inverter will be turned off, and the off-grid inverter can be used.
Features:
- Don’t waste your solar panels with an off-grid system:
- Have power storage for emergencies, camping, tailgating, etc AND have the ability to send power back to the grid when you’re at home.
- Plug and Play, no splicing, crimping, or soldering required.
-
- Standard USA 3 prong wall outlet connector
- 5/16” battery ring terminal connectors
- Perfect for on-grid or off-grid use at home, industrial use, commercial use, tailgating, camping, emergency power outages, etc.
- Premium components like 200°C silicone insulated wire, efficient MPPT charge controller, pure sine inverters and rugged enclosure.
- Built-in short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection.
- Assembled in USA with technical support in USA.
Terms used in this listing:
Grid: When we refer to the grid, we are referring to the transmission system for electricity in America. Specifically, residential/commercial 120VAC/1PH/60HZ connections. This product includes a pure sine 48-62HZ grid tie inverter. It may work in other countries such as Canada, Mexico, South America, and Europe, but it has not been tested in these regions.
RevoPower does not make any claims or guarantees regarding power sent back to the grid or a reduced electric bill. Sending power back to the grid is different with every electric provider. In most cases, the relatively small amount of power “sent back” to the grid will in fact be consumed within the same residence, thus, never actually be sent to the grid. Meaning, your electric bill should go down. If you intend to sell power back to your electric provider, you must contact them as there are many rules and regulations and we cannot be responsible for knowing all the regulations in every jurisdiction.
Specifications
Battery chemistry compatibility: |
Deep Cycle Lead Acid Flooded Lead Acid Sealed Lead Acid (SLA) Absorbed Glass Mat (AGM) Gel Lithium ion Lithium Iron Phosphate (LiFePO4)
(A 12V automotive starting battery will function, but run times will not be ideal) |
Maximum Gridless Revolution lithium batteries that can fit inside: | 6,000Wh |
Solar charge controller technology: |
MPPT |
Solar Input requirement (Check your solar panel's label for "VOC" rating: |
12V VERSION: 12V-30V 24V VERSION: 30V-45V |
Maximum off-grid battery charging solar panel input power: (Let us know if you need more solar input capacity) |
600W @ 12V 1,200W @ 24V
|
Solar charge controller power consumption at idle: |
1.0W |
Max Off-grid inverter output: |
2000W continuous / 4,000W surge |
Max Grid-tie inverter output: |
2,000W (1,000W x 2, 8.3A each) |
Input ports: |
|
Output ports:
|
|
Output port technology:
|
(1) USB-C PD & (1) USB-A QC 3.0: 18W Max. Output Power (5V@3.4A, 9V@2A, 12V@1.5A)
|
Temperature range: |
-4°F~131°F (-20°C~55°C) |
Inside dimensions: |
Enclosure internal dimensions: 20.5" L x 12.375" W x 9.5" H 25" L x 18" W x 19" H |
Weight: |
51 lbs |
Warranty: |
5 years |
Grid power voltage requirement: | Standard North American 90-140VAC (Typ 110-125 VAC), automatically detected |
Grid power frequency requirement: | Standard North American 48-62Hz, automatically detected |
Downloads
Installation and Operation manual