60 Amp Brake Switch for 3 Phase AC Wind Turbine Generator

This universal wind turbine switch can be used as a disconnect as well as a brake for most 3 phase wind turbines.  Here’s how it works:

• Run: 3 phase turbine is connected to your rectifier.
• Free: Turbine is disconnected and able to “free turn”.  Free wheeling a wind turbine is generally only for temporary or testing purposes.
• Brake: Wires are shorted together (Brake on).

 The switch comes pre-jumpered and only requires stripped wires to connect.

This product uses Wago next generation connectors, a better alternative to wire nuts.

SPECIFICATIONS:

• Maximum current at 600V: 30A (10A per wire)
• Maximum current at 12V: 60A (20A per wire)
• Durability: 1,000,000 cycles
• Accepts wire size: 24-12 AWG