260W-350W Mini Grid Tie Inverter / Microinverter, for 18-50V Solar panels, Plug and Play for 120V 3-prong Receptacles

UPC:
722208350915
$149.00 - $299.00
(1 review)
Current Stock:
Adding to cart… The item has been added

Simplify your setup with these plug and play grid tie inverters! Small enough to mount on your solar panel or near your homes outlet, these grid tie inverters require no settings, no programming, and no additional setup. Truly plug and play, it plugs into any 3 prong household outlet. We recommend a maximum of 4 per household circuit. This grid tie inverter includes island protection. Island protection means if your grid connection is down, the inverter shuts off. This is a safety feature to prevent repairment from being exposed to live voltage. The inverter requires an active grid connection before it can start sending solar power back to the grid.


  • Maximum 250W AC output power
  • Just plug directly into any wall receptacle!  Waterproof 3 prong plugs straight into your wall outlet or an extension cord
  • Pre-wired, plug and play, no special modifications or wiring required.
  • Super-compact form factor


Fine print: Do not attempt to plug this into a 2 prong outlet without a ground. This is a grid tied inverter, meaning it must be connected to the grid to function. It cannot be used as a backup system when your power is out. For backup systems, we recommend our off grid solar generators.

Why grid tied? Sending solar power back to the grid not only helps offset your electricity bill, but some areas will even let you make profit if you generate enough power.

Specifications


260W Version 350W Version
Max Input Rating: 260W 350W
Max Output Rating:  250W 320W

 

 

  • Solar Panel VOC rating: 18-50V DC
  • Max efficiency range (MPPT range): 24-40V DC
  • Grid requirement: Standard residential / commercial 110/120 V AC 3-prong receptacle, 1-phase, 60 Hz
  • Maximum ambient operating temperature (standard): 30 deg C / 86 deg F 
  • Maximum ambient operating temperature (active cooling): 50 deg C / 122 deg F
  • Active cooling power requirement: USB-C 12V, 8W
  • Minimum operating temperature: -40 deg C / -40 deg F
  • Maximum number of inverters per 15A household circuit: 6
  • Maximum number of inverters per 20A household circuit: 8
  • Efficiency: 90-99%
  • Weatherproof rating: IP55

    Reviews

    • 5
      Use with a single panel

      Posted by beastmode on 28th May 2021

      I have found that a single panel is ideal per inverter and parallel does not seem to increase wattage. I have two in a large attwood battery box and one in a small U1 battery box and these guys get too hot to touch so I may look into a fan built into a box to assist in venting. Overall they seem to work ok. I use on 100w panels and this seems to be an ideal size for moving around with limited space.